Commissioning / Training / Site Surveys

Paktronic offer training to the client or to the client’s operatives covering all aspects of Control Panel operation, Panel Hardware (eg. Variable Speed Drives, Soft-Starts, Ultrasonics), PLC/HMI systems and software programming techniques.

Paktronic can also assist the client with site surveys at any stage of a project.
Scoping surveys/feasibility studies can be carried out to determine the existing infrastructure and systems to ascertain the best solution for the clients proposed scope.


These courses can be tailored for the specific project and aimed at the site operatives using the panel on a day to day basis or can be more generalised to give a broad introduction to the specific topic chosen. Post commissioning training days are commonly delivered on site to ensure the clients site operatives are fully aware of the hardware/software content of the panel prior to handover.

Courses can be held at Paktronic in their dedicated training room or can be conducted on site or at the client’s offices. Training can be offered by Paktronic engineers and/or representatives from equipment suppliers, depending on the specific requirements.

Site Surveys

Site surveys to enable a quotation to be produced. Paktronic engineers will attend site to run through a pre-prepared scope to ensure the tender is suitable for the site specific requirements.

Site Surveys to ascertain the condition of an existing panel to advise the client whether the panel can be re-used or whether it requires replacement. A full report can be generated detailing the survey findings and conclusions/recommendations.


Back to Control Panel Services